|
|
|
|
|
|
|
Jelly Filled Cables
|
Aerial Telecom Cables
|
Optical Fibre
|
Buried Service wire
|
Installation Cables
|
|
|
Paramount offers a wide range of Optical Fibre Cables (Single mode and Multi mode) including Armoured Aerial, Un-armoured, All Dielectric Self Supporting Optical Fibre Cables and Optical Fibre Direct to Home Cables. Cables manufactured conform to IEC-794, ITU-T, TC-55-2000 specifications and are type approved by the Department of Telecommunications, Government of India.
Unitube, Multitube, Tight Buffer Ribbon Type.
Single mode, Multi mode, primary coated with double UV cured acrylate.
2, 6, 12, 24, 48, 96, 144, 288. Other sizes on order
Non metallic (solid FRP Aramid yarn Glass yarn) and metallic (solid steel wire).
Water resistant filling compound
Water Blocking Material
Water blocking powder tape, if required.
HDPE Black
If required, corrugated steel tape of 0.125 mm thickness coated with copolymer 0.05 mm thickness, longitudinally laid with minimum overlap of 10%.
Nylon (Orange), HDPE (Black)
|
| Paramount has attained quantitative growth in the Telecom Sector by servicing market leaders such as Bharat Sanchar Nigam Ltd, Mahanagar Telephone Nigam Ltd. and large private sector players including Bharti Airtel and Reliance Telecom. |
 |
Paramount offers a complete range of high quality Telecommunication Cables, including Optical Fibre Cables for telecommunications, Direct to Home Optical Fibre Cables for cable TV, Polythene Insulated Jelly Filled Cables and Aerial Self Supporting Cables for subscriber distribution networks, Installation Cables for Digital Exchanges, Co-axial Cables for signal distribution, MATV, Data Transmission Cables, Computer Cables and PCM cables, amongst others.
Jelly Filled Polythene Insulated Jelly Filled cables (PIJF) also known as Jelly Filled Telephone Cables (JFTC) are used as feeder and distribution cables for connection between exchanges and subscribers. The range offered is single pair upto 4800 pairs. These cables can be laid in ducts or directly buried. Our Jelly Filled Cables conform to standard specifications such as DOT specification no. GICUG-01102 February 1996, BS 3573, IEC708-1, CW 1128A, IRS-TCI41 . Type approved by Department of Telecommunications, Government of India.
Twisted Pairs or Star Quads
Solid annealed, bare copper wire of 0.4, 0.5, 0.63 or 0.9mm. Other sizes on order .
Solid MDPE or HDPE, fully colour coded. Foam skin insulation as per requirement.
In units of 10 or 20 pairs upto 100 pairs. For cables having more than 100 pairs, 5 units of 10 pairs and 20 pairs are laid up to constitute super units of 50 and 100 pairs respectively.
Suitable water resistant compound.
One or more helical longitudinal paper or plastic tape.
| Moisture Barrier and Screen | |
|
Double side plastic coated aluminium tape laid longitudinally with smooth, nominal thickness of 0.20mm. Minimum overlap 6mm, bonded to the inner surface of the polythene sheath.
If required, solid tinned copper 0.5 mm.
If required 2 Steel tapes of 0.5mm or 0.8mm thickness helically laid with a maximum gap of 35%.
Black LDPE
|
Aerial self supported telecom distribution cables are an economical and reliable way to provide connections between telephone exchanges and distribution points, especially in hilly and uneven terrain. Paramount offers a complete range of Aerial Cables conforming to various national and international specifications such as G/CAF-01/01 November 1992, 52-23/85-TRC, BS: 3573/90, IEC: 708-1, IEC: 708-4, CW 1252A.
Star Quads or Pairs.
Solid annealed bare copper wire of 0.4, 0.5, 0.63 or 0.9mm. Other sizes as per requirement.
Solid polyethylene, fully colour coded.
Assembled in units of 10 to 50 pairs or in super units of 20 to 25 pairs for 100 pair cables and above. Units are identified by colour coding of unit-binder.
One or more plastic tapes.
|
Moisture Barrier and Screen | |
|
Double sided plastic coated aluminium tape with smooth, nominal thickness of 0.20mm.
If required, solid tinned copper 0.5 mm.
If required, 2 steel wires of 0.5mm or 0.8mm thickness helically laid with a maximum gap of 35%.
Black LDPE.
|
Single star quad, copper jelly filled cables for subscriber connections, suitable for underground laying.
One Star Quad.
Solid annealed bare copper wire of 0.63mm.
Solid polyethylene, fully colour coded.
Four insulated conductors twisted into a star quad.
Extruded PVC to fit closely over the star quad.
|
Moisture Barrier and Screen | |
|
Double sided plastic coated aluminium tape with smooth, nominal thickness of 0.20mm.
If required, solid tinned copper 0.5 mm.
Black LDPE
|
Cables for internal exchange installations, connection between selector racks, distribution frames etc. The cable can be unarmoured or galvanized steel wire or strip armoured. Conforming to standard specification such as G/WIR-06/02 May 1994, G/WIR-09/02 December 1995, G/WIR-04/01 February 1993, S/WS-114D, CW1251, CW1271, CW179A, CBL7000, TC-24/91, BS 3575/90, IEC: 189 H-2, IEC: 753.
Solid, annealed bare or tinned copper wire of 0.4, 0.5, 0.6, 0.7 or 0.9mm. Other sizes on order
Insulation
PVC, Solid Polyethylene or Nylon. Single coloured conductors have fully colour-coded insulation. Bi-coloured conductors have coloured rings printed on the coloured insulation.
Components are assembled in concentric layers or in units for higher pair sizes.
One or more plastic tapes.
Pairs, triads or quads can be individually or collectively screened or both. Screening with Copper or Aluminium Mylar Tapes with a minimum 30% overlap.
If required, solid tinned copper wire of 0.5 mm.
PVC, Black or Grey.
|
|
|
|
